Diploma in Painting

The type of line that projects from an object for the express purpose of locating a dimension is a ________ line.

When creating an isometric drawing in Auto-CAD the drafter can utilize the Dynamic Input and Polar Coordinate system to place both vertical and horizontal lines. A line created from one point 3 inches at 180 degrees would be a ________ line.

An oil refinery relies on which type of drafter to maintain and update the technical piping drawings used for the construction and maintenance of the facility.

Which spinning method is known for producing compact and strong yarns?

Which of the following components of Gothic cathedrals would be useful to study in a physics class because it was designed to support outward force?

Which type of yarn has a single strand without any twists?

Which spinning method is known for its high production rate and low labor requirement?

Which of the following position of door and type of door shutter offer more privacy to room?

Centre door - Single shutter

Which of the following is not a type of yarn twist?

Which plan is approved and sanctioned by competent authority?

The strong contrast of dark and light in the work exemplifies which of the following painting techniques?

How can the drafter prevent Auto-CAD from placing or stacking another center mark on a circle when adding a diameter dimension to it?

A ________ section allows the drafter to create a Cutting Plane line which is not in a straight line across the part.

Which of the following gives major importance to outside view?

Which process is used to remove impurities from raw cotton fibers?

Miniature painting was developed in which part of India?

What is the another name for "Sub-divisional plan"?

In the normal building, the minimum height of the plinth is to be given above GL is ______

The artwork is most characteristic of art from which of the following cultures?

What is the purpose of roving in yarn manufacturing?

\Welding drawings are a special type of this kind of drawing:

Flowers, leaves and plants were depicted first time in the paintings of which period?

The use of which of the following camera filters most likely contributed to the vivid color of the sky in the photograph?

What should be the minimum floor area in sq.m. for bathroom cum water closet?

Which of the following had played an important role in Bengal School of Art?

A horizontal projection ornamentally moulded immediately below the roof (or) junction of wall and ceiling is called ______

This type of solid is egg-shaped and can be created by revolving an ellipse around one of its axes:

Which of the following belong to Madras School of Art?

Italian Baroque art developed primarily for which of the following purposes?

This is the measured size of a finished part:

What percentage of plinth area of the residential building comes to carpet area?

Isometric drawings are often used by ________ to help illustrate complex designs.

What is the primary raw material used in yarn manufacturing?

One critical issue drafters need to pay close attention to is the ________.

Persian and Arabic influence in the Paintings were seen in which period of history?

Which of the following IS code in used for fire safety?

Which season gives more lighting to the building?

The Progressive Artists Group in Bombay in 1948 was developed under ............

Lines of an isometric drawing that are not parallel to the isometric axes are called this:

A partial auxiliary view usually shows only features on the _________ of the inclined line and not any projection of other planes.

These are vertical distances above a common datum, reference plane or point:

An architect often relies on a _________ to complete the set of technical drawings used in the design of an office building.

Which Buddhist text describes the existence of painted figures in many royal buildings?

The distance a screw thread advances axially in one turn is the:

According to the Occupational Safety and Health Administration (OSHA), informational safety sheets must be present in art rooms that contain which of the following safety risks?

In this type of concrete, the steel is pre-tensioned before the superimposed load is applied:

The organized and orderly approach to solving problems is known as the:

Drafters should use a ________ in a section view of a mechanical part that includes the cylindrical view of a threaded hole.

What is the function of a spinning frame in yarn manufacturing?

The use of shape to represent the features of the mask is best described in which of the following ways?

Mixing the colors blue and red in equal proportion will produce which of the following hues?

When creating a Cutting Plane line with Auto-CAD it is customary to use a ________ to create the line.

This type of section is limited by a break line:

Which of the following aspects of the painting is most characteristic of paintings created in the Mannerist style?

The use of line in the building's design achieves primarily which of the following effects?

Which direction aspect is best suitable for Gallery or Verandah?

In whose Emperor reign illumination and individual miniatures were replaced by wall painting, the most vital form of art?

Which of the following statements are correct regarding Paintings:

The art of painting reached its climax during the period of which emperor of Medieval India?

Which of the following is a natural fiber used in yarn manufacturing?